Hydraulic

Hydraulic

Fliptop Multi Hydraulik is our system that opens from the center out to the sides. Opening is done by a hydraulic cylinder, mounted at the front or rear.

On longer systems, cylinders are fitted both front and rear. Cylinders and flow-control check valves are included in the system, but the control valve is ordered separately. We also offer complete hydraulic units with remote control as accessories. The entire system is hot-dip galvanized and all pivot points have bearing bushings.

Pneumatic

Pneumatic

Fliptop Multi Pneumatik is our system that opens from the center out to both sides. Opening is done by an air cylinder, mounted at the front or rear.

On longer systems, cylinders are fitted both front and rear. Cylinders and flow-control check valves are included in the system, but the control valve is not. Valves for operation are ordered separately; we have several alternatives, of which the 5/3 lever valve is the most common. We also offer complete control systems with remote control — see accessories for more information. The entire system is hot-dip galvanized and all pivot points have bearing bushings.

Manual

Manual

Fliptop Multi Manuell is our manual system, which opens from the center out to the right and left.

Fliptop Multi Manuell is operated with two levers, at the front or rear depending on preference or available space. The position of the levers is adjustable during installation. Fliptop Multi Manuell is easy to open, has a low price and is simple to mount.

The entire system is made of galvanized steel. The operating levers lock in both the open and closed positions. A pull cable is connected to the locks, which release automatically when the pull cable is tensioned. All pivot points are fitted with bearing bushings.